Kyocera KM-4035 Operation Manual page 107

6 Press [Common] ([Common book]) or
[Private] ([Private book]) to display the
destinations stored in the selected
address book. In this example a
destination is selected from the
Common Address Book.
Press [ ] or [ ], select the desired
destination to be added and press
[Enter] ([Add dest.]).
When a destination is selected, an ⌧ is displayed next to it in the Select column to the right of the
Address column.
NOTE: The private address book is not displayed if the Address Book for Scanner is not running on
the sender(user)'s computer.
7 Confirm the destination(s) and press [Close].
Return to Step 5 to continue adding recipients.
8 Confirm the destination(s). Press [ ] or
[ ] to confirm that all selected
destinations are correct. Press [Delete] if
a selected destination is not needed.
Scanner Setup
9 Press the Auto Color, Full Color or Black&White key
to select a color mode.
10 The scanner setup screen is displayed
in the right side of the screen. Press the
appropriate keys to configure the various
settings. This section explains the setup
procedure using [Orig. Set Direction] as
an example.
Press [Orig. Set Direction].
0-9 Address Select
Group A
GHI
Group B
O PQR
User A
X
User B
User C
Private
Ready to scan.
Place the original and select destination.
Scan to PC-Sending
Destination
Group A
Save at Address
User PC Book
to scan. ( Full-Color
riginal and select destination.
ding Register Prgrm
Select
Orig.Size
Delete
Select
Send Size
Address
Book
Basic Operation
Close
Address
1.
Up
Properties
Down Enter
( Full-Color ) Original
11×8½"
Register Prgrm Cont. TX to
Auto Top Edge
Select Orig. Set
Orig.Size Direction
Auto size 200dpi
Delete
Select Scanning
Send Size Resolution
Basic
Quality
) Original Send
11×8½" 8½×11"
08/08/'05 14:00
Cont. TX to Cancel
Auto Top Edge Auto
Orig. Set File Name
Direction Input
Auto size 200dpi JPEG
Scanning
File Type
Resolution
Basic
Quality Edit
08/08
3-25