Table of Contents
Advertisement
Preparations
Loading Paper on the MP Tray
Standard paper (60 to 90 g/m²), thick paper (90 to 163 g/m²), color paper, transparencies, and
letterhead paper can be set on the MP tray. Always use the MP tray when copying and printing onto
special paper.
The types of paper and the number of sheets that can be set on the MP tray at one time are as
follows:
•
•
•
•
Important
•
•
•
1
Open the MP tray towards you until it click into place.
3-4
Standard paper (80 g/m²): 50 sheets
Thick paper (120 g/m²): 25 sheets
Thick paper (160 g/m²): 10 sheets
Transparencies: 1 sheet
After setting paper on the MP tray, be sure to use the operation panel to select the paper size.
For details, refer to Chapter 1 in Advanced Operation Guide, Select the Original Size for
Copying.
To use non-standard size paper, be sure to register the custom paper size. For details, refer to
Chapter 5 in Advanced Operation Guide, Registering Custom Paper Size.
When using transparencies, be sure to use a type of film that can withstand the heat of the
fixing process. The following products are recommended: Arkwright (LTR) or 3M PP2500 (A4)
Advertisement
Table of Contents
