Baud Rate; Character Length; Parity - Intermec EasyCoder PM4i User Manual

EasyCoder PM4i Printer User's Guide (Fingerprint Version)
Note: The serial communication parameters have no effect on
parallel or EasyLAN communications, or on the IN and OUT
ports on the optional Interface Board.
Make sure the printer's communication parameters match the
setup of the connected device or vice versa. If the setup of the
printer and the setup of the host do not match, the response from
the printer to host will be garbled.

Baud Rate

The baud rate is the transmission speed in bits per second. There
are eight options:
• 1200
• 2400
• 4800
• 9600 (default)
• 19200
• 38400
• 57600
• 115200

Character Length

The character length specifies the number of bits that will define
a character.
• 7 Characters ASCII 000 to 127 decimal
• 8 Characters ASCII 000 to 255 decimal (default)

Parity

The parity decides how the firmware will check for transmission
errors. There are four options:
• None (default)
• Even
• Odd
• Mark
• Space
Chapter 6 — Setting Up the Printer
55