Cut-Off - Intermec EasyCoder PM4i User Manual

Chapter 4 — Media Load

Cut-Off

34
14 Press the Feed button to advance the media and adjust the
media feed.
The EasyCoder PM4i can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when the media is to be cut off by an automatic paper cutter
(option).
Use the Feed key when loading the same type of media. When
switching to a new type of media or if the printer does not feed
out the media properly, simultaneously press the Shift and Feed
keys to perform a "testfeed."
Cut-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive labels with liner (cut only liner between labels)
The cutter is designed to cut through paper-based media with a
thickness between 60 and 175 μm, which roughly corresponds to
a paper weight of 60 to 175 grams/m
The cutter should not be used to cut through labels, because the
adhesive will stick to the shears, which can damage the cutter.
EasyCoder PM4i Printer User's Guide (Fingerprint Version)
2 (basis weight 40 to 120 lb).