Setting The Vibrate Mode Using Intermec Settings; Setting The Vibrate Mode Using Sounds & Notifications - Intermec CK61 User Manual

Setting the Vibrate Mode Using Intermec Settings

Setting the Vibrate Mode Using Sounds & Notifications
CK61 Mobile Computer with Windows Mobile User's Manual
You can also set the Vibrate mode using the Intermec Settings applet.
To set your CK61 to vibrate
1 Tap Start > Settings > the System tab > the Intermec Settings icon.
2 Tap (+) to expand Device Settings > Good Read > any of the Scanner
options > Beep or Vibrate, then tap Vibrate.
3 To disable the vibrate, tap any of the other Beep options.
4 Select File > Save Settings to save your changes.
5 Select File > Exit to close the applet.
The Sounds & Notifications applet is another place where you can set the
vibrate mode.
Chapter 1 — Using the Computer
25