Intermec CK61 User Manual page 113

Chapter 3 — Configuring the Computer
98
To initiate a connection
1 On your desktop or laptop, double-click the EasySet icon to activate
EasySet if you have not already done so.
2 In the left side, double-click Data transmission settings > Bluetooth
parameters > connect/disconnect > compose BT address.
3 Enter the Bluetooth address assigned to your CK61 (shown in your
Bluetooth applet), then click OK to close this dialog.
4 The connection label for the SF51 appears to the right, similar to the
following. Scan the label once, then confirm the blue Intermec Ready-
To-Work™ indicator on the end of the SF51 starts blinking, which
means it is trying to connect. When connected, the indicator assumes a
steady blue, then SF51 data gets wedged through the keyboard
interface.
CK61 Mobile Computer with Windows Mobile User's Manual