Accessories For The Ck61 - Intermec CK61 User Manual

Chapter 1 — Using the Computer

Accessories for the CK61

26
To set the vibrate mode
1 Tap Start > Settings > the Personal tab > the Sounds & Notifications
icon.
2 Tap the Notifications tab.
3 Select the event from the Event drop-down list.
4 Check Vibrate.
5 Tap ok to close.
You can use these accessories (sold and ordered separately) with the CK61.
To order accessories, contact your local Intermec representative.
AC4 Quad Battery Charger
Use the Quad Battery Charger to charge up to four AB11 Batteries without
having to remove them from the CK61. You can insert up to four CK61s
with batteries installed making it easy to remember to charge your batteries
overnight. The charger also provides power to your CK61s while
communicating via Ethernet.
AD3 Ethernet Multidock
Use the AD3 Ethernet Multidock to hold up to four CK61s with a batteries
installed. The multidock charges the batteries, provides power to the
CK61s, provides one Ethernet connector, and provides a serial port for each
inserted CK61.
AD5 Single Dock
Use the AD5 Single Dock to hold a CK61 with its battery installed. The
single dock charges the battery, provides power to the CK61, provides an
Ethernet connector, and provides a serial port for the inserted CK61.
CK61 Mobile Computer with Windows Mobile User's Manual