Viewing Sf51 Information From Your Computer; Using Configuration Parameters - Intermec CK61 User Manual

Viewing SF51 Information from Your Computer

Using Configuration Parameters

CK61 Mobile Computer with Windows Mobile User's Manual
Note that in the CK61, the Intermec Settings applet can display up to seven
separate SF51 connections. The following illustration shows such
connections under the Data Collection option.
To view the SF51 connections
1 Tap (+) to expand Data Collection.
2 Tap (+) to expand the SF51 Scanner connections to view MAC
addresses, firmware version numbers, and whether each scanner is
connected to the CK61.
3 When you clear (uncheck) Enable scanner port, the SF51 is
disconnected from the CK61.
4 Check Enable scanner port again to reconnect.
To rename these connections to descriptions more suitable for your situation
• Press the stylus on each SF51 Scanner connection for a pop-up menu,
select Rename, enter the new description, then tap ok to save your
entry.
When the SF51 is connected, configuration changes take effect
immediately. When the SF51 is not connected, configuration changes take
effect once the SF51 is reconnected.
A configuration parameter changes the way the CK61 operates, such as
configuring a parameter to have the CK61 emit a very loud beep in a noisy
environment. Use any of these methods to execute configuration
parameters:
Scan EasySet bar code labels:
You can use EasySet from Intermec Technologies Corporation to print
configuration labels. Scan the labels to change the imager configuration and
data transfer settings. For more information, see the EasySet online help.
Chapter 3 — Configuring the Computer
99