Intermec CK61 User Manual page 163

Chapter 5 — Network Support
148
1 Make sure you have configured the communications and radio
parameters on your CK61 and that Funk is your security choice.
2 Open Intermec Settings. Tap (+) to expand Communications > 802.11
Radio > Funk Security > Profile X with "X" being "1" through "4.".
3 For Association, select "Open" and press Enter.
4 For Encryption, select "WEP" and press Enter.
5 For 8021x, select "None" and press Enter.
6 For Transmit key, select which WEP key to use for encryption of
transmitted data.
7 Define a value for each key, up to four. Enter an ASCII key or a hex key
either 5 or 13 bytes long based on the radio capability. Set a 5-byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Precede hex keys
with 0x and make sure the keys use 5 or 13 hex pairs.
To start 802.11b/g communications using the Profile Wizard
• Tap Start > Settings > the System tab > the Wireless Network icon.
A profile contains all the information necessary to authenticate you to the
network, such as login name, password or certificate, and protocols by
which you are authenticated.
You can have up to four profiles for different networks. For example, you
may have different login names or passwords on different networks, or you
may use a password on one network, and a certificate on another.
CK61 Mobile Computer with Windows Mobile User's Manual