Using Tls (Eap-Tls) - Intermec CK61 User Manual

Chapter 5 — Network Support
154
3 Tap Root CA, select a root certificate, then OK to close.
4 Enter the Common Names of trusted servers.
Note: If these fields are left blank, the client will accept any authentication
server with a valid certificate. For increased security, you should specify
exactly which authentication servers you expect to use.
5 Tap ok to return to the Security page.

Using TLS (EAP-TLS)

EAP-TLS is a protocol that is based on the TLS (Transport Layer Security)
protocol widely used to secure web sites. This requires both the user and
authentication server have certificates for mutual authentication. While
cryptically strong, this requires corporations that deploy this to maintain a
certificate infrastructure for all their users.
Use "TLS" to configure using EAP-TLS as an authentication protocol, pick
"Open," "WPA," "WPA2," or "Network EAP" as an association mode.
To configure using TLS
1 Set 8021x Security as "TLS, then choose any of the following:
• Set Association to "Open."
• Set Association to "WPA."
CK61 Mobile Computer with Windows Mobile User's Manual