Configuring Ck61 Parameters; Configuring With The Setup Assistant; Configuring The Computer With Intermec Settings - Intermec CK61 User Manual

Chapter 3 — Configuring the Computer

Configuring CK61 Parameters

Configuring with the Setup Assistant

Configuring the Computer With Intermec Settings

90
3 Write commands for AutoRun.dat. For more information, see
"AutoRun" on page 86.
4 Save this Notepad file as AutoRun.dat.
5 Copy the AutoRun.dat file to the "\SYSTEM" folder on your CK61.
During every boot, the system scans for AutoRun.dat in the "\SYSTEM"
folder.
Here is a sample AutoRun.dat file that runs a dialer application and
connects to a VPN:
EXEC "\Program Files\My Dialer\Dialer.exe" 348-2600
EXEC "\Program Files\My VPN\Connect.exe" MyDomain
You can configure many parameters on the CK61, such as the bar code
symbologies it decodes or the network settings. These characteristics are
controlled by configuration parameters. The values you set for these
configuration parameters determine how the computer operates. Use
configuration commands to configure the CK61.
When first setting up the CK61, use the Setup Assistant to set or enable
basic network parameters and connect your CK61 to the network.
The Setup Assistant guides you through setting the following basic network
parameters: date and time (including time zone), SSID (Network name),
DHCP server or IP address, subnet mask, and default router, primary and
secondary DNS or WINS addresses, and device name.
To set other parameters, use another configuration method. The Setup
Assistant runs on the CK61 when you turn on the computer.
After the Setup Assistant is complete, the CK61 should communicate with
the network. A network connection icon appears in the taskbar.
Use the Intermec Settings applet to configure the CK61 and view system
information. You can access the Intermec Settings applet while running any
application.
CK61 Mobile Computer with Windows Mobile User's Manual