Wireless Printing - Intermec CK61 User Manual

Wireless Printing

CK61 Mobile Computer with Windows Mobile User's Manual
The Wireless Printing applet separates the task of wireless printing from
other Bluetooth management items not relevant to this task.
Wireless Printing has a concept of the "current wireless printer." This
printer is the one to which the CK61 makes a connection when the wireless
printing COM port is opened. If there is no current wireless printer, there is
no wireless printing COM port. Registration and deregistration of this
COM port is controlled by the Bluetooth COM port control. Use the
Wireless Printing applet to handle the COM port registration. Customer
software or other test applications can also use this applet to manage the
COM port registration and deregistration.
The current wireless printer is stored in the registry and is registered and
deregistered on Bluetooth stack load/unload. If the current wireless printer
changes, the existing wireless printing COM port is deregistered, and the
new one is registered instead. The registered COM port is stored in the
registry as the "WPort."
For information on using Bluetooth communications, see the Bluetooth
Resource Kit in the IDL, which is available as a download from the
Intermec web site at www.intermec.com. Contact your Intermec
representative for more information.
Use any of the following methods to set the wireless printer:
• Use a Bluetooth device search to locate the remote device (page 119)
• Manually enter the remote Bluetooth Device Address (page 120)
• Use Current Wireless Printer to set a different printer (page 121)
To do a Bluetooth device search
1 Select Start > Settings > the System tab > the Wireless Printing icon.
2 Clear (uncheck) Show Printers Only if you want to find more than just
the Bluetooth printers.
3 Tap Search to initiate the device search.
Chapter 5 — Network Support
119