Using Static Wep Security - Intermec CK61 User Manual

CK61 Mobile Computer with Windows Mobile User's Manual
c For Validate Server Certificate, select "Yes," then press Enter.
Note: You must have the date on the CK61 set correctly when you enable
Validate Server Certificate.
d Enter a User Name and Subject Name. You can also enter a Server
1 Common name or Server 2 Common name to increase security.
If you select "TLS:"
a Load a user and root certificate on your CK61 (see page 162).
b For Validate Server Certificate, select "Yes," then press Enter.
Note: You must have the date on the CK61 set correctly when you enable
Validate Server Certificate.
c You must enter a User Name and Subject Name. You can also enter
a Server 1 Common name or Server 2 Common name if you want
to increase your level of security.
If you select "LEAP" or "EAP-FAST:"
a Select User Name, then type your user name.
b Press Enter.
c Select User Password, then type a user password.
d Press Enter.
6 Select File > Save Settings, then select File > Exit to close the Intermec
Settings applet.

Using Static WEP Security

The CK61 uses the Wired Equivalent Privacy (WEP) protocol to add
security to your wireless network based on the 802.11b/g standard. To use
WEP security, you need an access point with an 802.11b/g radio.
To configure static WEP Security with Funk Security
Use this procedure to set Static WEP security with Funk security.
Chapter 5 — Network Support
147