Receive Mode Selection - Icom IC-R1500 Instruction Manual

3
SETTING A FREQUENCY

■ Receive mode selection

Receive modes are determined by the physical properties of
the radio signals. The receiver has 6 receive modes: LSB
3
USB, CW, AM, WFM and FM modes. The mode selection is
stored independently in each memory channels.
Typically, AM mode is used for the AM broadcast stations
(0.495–1.620 MHz) and air band (118–135.995 MHz), and
WFM is used for FM broadcast stations (76–107.9 MHz).
q Push and hold [TS•MODE] for 1 sec. to enter receive
mode select mode.
[TS•MODE]
w Rotate [DIAL] to select the desired mode.
[DIAL]
ePush any switch to exit receive mode select mode.
10