D Meter Type Selection; Voice Synthesizer Operation - Icom IC-7600 Instruction Manual

3
BASIC OPERATION

D Meter type selection

A total of 3 meter types are available in the IC-7600—
Standard, Edgewise and Bar meters.
Follow the instructions below for the meter type selec-
tion.
q Push [EXIT/SET] several times to return to normal
screen, if necessary.
w Push [SET] (F-6), then push [DISP] (F-3) to select
display set mode.
e Push [Y] (F-1) or [Z] (F-2) to select "Meter type
(Normal Screen)" item.
r Rotate the main dial to select the desired meter
type from "Standard," "Edgewise" and "Bar."
t Push [EXIT/SET] to exit display set mode.

Voice synthesizer operation

The IC-7600 has a built-in voice synthesizer to
announce the operating frequency, mode* and S-
meter* in clear, electronically-generated voice, in
English (or Japanese).
Select the desired parameters to be announced, such
as audio level, speed, language, contents, in the set
mode in advance.
Push [SPEECH/LOCK] to announce the currently
selected frequency and S-meter level*.
Push a mode switch to announce the appropriate
mode*.
* The S-meter level and operating mode announcements
can be deactivated, respectively.
NOTE: When "LOCK/SPEECH" is selected in
[[SPEECH/LOCK] Switch] item in others set mode,
pushing and holding [SPEECH/LOCK] activates
the voice synthesizer.
35
(pgs. ??, ??)
(pgs. ??, ??)
(p. ??)
DISP
F-3
F-1 F-2
• Edgewise meter
• Bar meter
SET
F-6
Main dial
EXIT/SET
SPEECH
LOCK