Setting The Output Power Level - Icom iF3200DEX series Operating Instructions Manual

3
BASIC OPERATION

Setting the output power level

If the transceiver has [High/Low] assigned to it, the
transmit output power level can be selected, depending
on the presetting.
When the battery voltage drops to where the status in-
dicator indicates "Low Battery 2," the output power au-
tomatically switches to "Low 1." (p. 2-3)
Push [High/Low] to set the transmit output power
➥
level.
• One beep sounds when "Low 1" is selected.
• Two beeps sound when "Low 2" is selected.
• Three beeps sound when "High" is selected.
3-12