D Preparation; D Unzipping The Firmware Folder - Icom IC-PW2 Instruction Manual

General

D Preparation

Access the following URL and download the firmware
file.
https://www.icomjapan.com/support/
L These instructions are based on Microsoft Windows 10.
1. Click the "Firmware/Software" link.
2. Enter "IC-PW2" into the Search box, and then
click [Search].
3. Click the desired firmware file link.
4. Carefully read "Regarding this Download Service."
Click "Agree," and then click [Download].
5. Click "Save as."
L The download procedure may differ, depending on
your browser and its settings.
Click
1 Enter
2 Click
1 Click
2 Click
Click
10-2
UPDATING THE FIRMWARE
6. Select the location where you want to save the
firmware, and then click [Save] in the displayed
File Download dialog.
• The file starts downloading.
• The firmware and the firmware utility are compressed
in a "zip" format folder. Unzip it before use.
7. After completing the download, click the icon
displayed when the mouse pointer is aligned.
• The folder with the downloaded file is opened.

D Unzipping the firmware folder

1. Right-click the downloaded firmware folder (zip
format).
• Right-click menu is displayed.
2. Click "Extract All..."
• After unzipping, a folder is created in the same
location as the downloaded folder.
L In the "PW2*" folder, "PW2*.dat" is created.
* Represents the release number.
10
Click
10
Click
Click