Icom IC-PW2 Instruction Manual page 47

System Language
Set the system language of the linear amplifier.
• English: The system language of the amplifier is
English.
Only alphabetical characters (A to Z,
a to z, 0 to 9) and symbols (! " # $ %
& ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ `
{ | } ~) can be displayed. If Japanese
characters (Kanji, Hiragana, and
Katakana) are included, the display
shows "=" or "_" instead of that
character. In that case, you can only
delete "=" or "_" in the amplifier's edit
mode.
• Japanese: The system language of the amplifier is
Japanese.
Kanji, Hiragana, and Katakana
characters and the 2-bytes symbols
can be displayed. To display such
characters in the Menu screen, set
"Display Language" to "Japanese."
L When this item is set to "English," the "Display Language"
item is not displayed.
When you set the system language of the linear
amplifier to Japanese, the amplifier has the
(Default: English) capability to display both English and Japanese
characters. However, if you select Japanese, all
menu items throughout the amplifier system will be
displayed only Japanese characters.
There will be no English item names. Unless you
are fluent in reading Japanese characters, use this
feature with extreme caution.
If you have changed the amplifier's language to
Japanese and do not understand the menu system
in the new setting, you will have to change the
language back to English by doing a partial reset of
the amplifier CPU. A partial reset will not clear your
call sign databases.
To do a partial reset of the CPU, do the following
steps:
1. Push
2. Touch [SET].
3. Touch the item (with the "etc." icon) shown below.
4. Touch the bottom item shown below.
5. Touch the upper item shown below.
6. Touch the left item.
7-5
.
MENU
• The amplifier displays "PARTIAL RESET," and the
partial reset is completed.
7
SET MODE
7