Emergency Procedure Checklists; Engine Failure After Takeoff - Skyleader 200 Pilot Operating Handbook

38
2 333 371 B
3.3.

Emergency procedure checklists

3.3.1. Engine failure after Takeoff

Emergency landings are generally carried out in the case of engine failure (i.e. the engine cannot be re-started)
1. Immediately establish a glide, with airspeed of 100-110 km/h
2. Flight altitude:
- if altitude less than 150 ft AGL - continue straight ahead and land in RWY direction (possibility to change
direction to 15 ° from RWY axis)
- if altitude more than 150 ft - to land in an open area without hazards or obstructions
3. Direction - preferably in the RWY direction, preferably into the wind
4. Flaps - use as needed
5. Magneto A and B switches - switch "OFF"
6. Landing gear - using depend on landing area character (time for L.G. openning takes approx. 20 sec.)
7. Fuel cock - CLOSE
After landing:
8. Do not taxi
9. Parking brake - "ON" (if landing gear has been openned)
10. Fuel pump - switch "OFF"
11. Transponder (if has been installed) - STB (Stand-By mode)
12. Toggle switches, Avionics - switch "OFF"
13. Master switch - switch "OFF"
14. Emergency Parachute System (if has been installed) - LOCK
15. Exit the ULL aircraft and seek assistance
KP 2U POH 05/2022
Alititude loss during 180° turn is aproximately 460ft
Never change selected landing area at last minute.
Watch selected area during landing maneuvre.