Skyleader 200 Pilot Operating Handbook page 58

58
2 333 371 B
g) Flaps (7. 8. 15. 16.) – check the following:
• Skin - Check
• Nuts and screws secure - Check
• Clearance in flap installation points - Check
• Flap control system - Check
• Rollers free motion (during flap movement)
• Flap lock mechanism in extended position – Check function (pushing to flap trailing edge)
• Extend flaps to Landing position and repeat previous flap checks
h) Main landing gear (8. 15.) – check the following:
• Tyre pressure - Check
• Main wheel with brake body; shock absorber - Check
• Tyre surface and tyre position with regard to wheel rim (according to red mark) - Check
• Hydraulic hoses - Check
• Folding strut - Check
• Nuts and screws secure - Check
• Main Landing Gear leg - Check
• Main Landing Gear sensors - Check
KP 2U POH 05/2022