Emergency Parachute System Activation - Skyleader 200 Pilot Operating Handbook

3.3.26. Emergency Parachute System activation

1. Fuel cock - CLOSE
2. Magneto A and B switches – switch "OFF" both
3. Seat belts - tighten and fasten
4. Pull handle to release the Emergency Parachute System
5. Radio call - May Day, report your situation and location
6. After reaching ground: Master switch - switch "OFF"
The Emergency Parachute System releasae handle is installed on the top of left-side instrument pannel
Max. airspeed for EPS activation = 300km/h (162kt, 186mph) IAS
Min. height for EPS activation = 90m AGL (295ft AGL) minimum speed 90km/h (49 kt) (56 mph) IAS
The Emergency Parachute System is designed for use below a maximum speed of 300km/h (162kt, 186mph) IAS.
In an emergency situation it is necessary to respond quickly before maximum speed is reached. Therefore
practicing the necessary drills (without actually deploying the parachute) is advisable to prove that you can
This handle must be unlocked before flight!
activate the rescue system effectively.
51
2 333 371 B
KP 2U POH 05/2022