Engine Fire - In Flight; Electrical Fire In Flight - Skyleader 200 Pilot Operating Handbook

44
2 333 371 B
5. Heating (if has been installed) - push in to CLOSE
6. Leave cockpit immediately and extinguish fire (if it is possible)

3.3.11. Engine fire - in flight

1. Fuel pump - switch "OFF"
2. Fuel cock - CLOSE
3. Throttle - OPEN (max. power)
4. Heating (if has been installed) - push in to CLOSE
5. Magneto A and B switches (after fuel depletion and engine stop) – switch "OFF"
6. Maintain airspeed at 100-110 km/h
7. If fire continues, try side slipping. If this does not help, increase airspeed to the safe maximum in this situation.
8. Radio call - May Day, report your situation and location
9. Perform Emergency landing to terrain according to Art. 3.3.2
10. After landing: Master switch - switch "OFF"
After extinguishing fire, do not try to start up the engine again!

3.3.12. Electrical fire in flight

1. Toggle switches, Avionics - switch "OFF"
2. Magneto A and B switches – switch "OFF"
3. Master switch - switch "OFF"
4. Ventilation - OPEN
5. Perform an 3.3.1 Emergency landing to terrain
switch is switched "OFF")
- Land with increased airspeed!
KP 2U POH 05/2022
Time necessary to deplete fuel from carburettor system is approx. 30 sec.
Do not attempt to restart the engine after extinguishing fire!
Time necessary to deplete fuel from carburettor system is approx. 30 sec.
Do not attempt to restart the engine after extinguishing fire!
(see Art. 3.3.2) as soon as possible without using flaps (Master