Landing Gear Supervisory Control - Skyleader 200 Pilot Operating Handbook

86
2 333 371 B

7.3.7. Landing gear supervisory control

The undercarriage control lever is situated on central part of the instrument panel and is used for landing gear
opening and retracting. Actual position of landing gear shows landing gear supervisory display, whitch is situated
next to landing gear control lever (on the instrument panel). If the undercarriage lever is in down position, landing
gear is open and there is shining three green LEDs on landing gear supervisory display. If the undercarriage lever is
in top position, landing gear is retracted and no LED is shining. For opening the undercarriage unlock the landing
gear lever by pulling backward the landing gear lock lever and then move down the landing gear control lever. The
Red LED are shining when undercarriage is moving to UP or DOWN position
Landing gear position is indicated visually on LG control display. Warning is provided by acoustic alarm when LG
is not extended and locked in "DOWN" position together with flaps in takeoff or landing position. Particular end
conditions are stated in the following table:
Possible conditions on landing gear control panel:
• Three green shines
- Landing gear is down
- Perform standard landing
• Three red or combination of red and green
- Gear is really unlocked but not fully down
- Use emergency lever to extend the landing gear until three green lights starts to shine or mechanical
indicator indicates the LG extended
- Perform standard landing
• At least one red does not shine (neither the green one) but is in order
- At least one locking hook is locked
- Do not use emergency lever to extend landing gear
- Perform belly landing
- After the landing is necessary to check the landing gear system by a qualified expert.
KP 2U POH 05/2022
Landing gear lever
Lock lever