Registering To The Service Provider - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Basic Administration and Configuration of Your Linksys ATA
Optional Settings
c. In the
optional Secondary DNS fields.
For PPPoE:
a. Select PPPoE from the Connection Type drop-down menu. This is the correct setting for
most DSL users.
b. Enter the values provided by the ITSP in the following fields:
– PPPoE Login Name
– PPPoE Login Password
– PPPoE Service Name
4. Click Submit All Changes. The Linksys ATA device reboots.
5. To verify your progress, click the Router tab and then click Status. Under System Status,
confirm the WAN Connection Type, Current IP, Current Netmask, Current Gateway, and Primary
DNS.

Registering to the Service Provider

To use VoIP phone service, you must configure your Linksys ATA device to the Service Provider.
1. Start Internet Explorer, connect to the administration web server, and choose Admin access
with Advanced settings.
2. Click Voice tab > Line
3. Enter the account information for your ITSP. The following is the minimum required
configuration to connect the ATA device to an ITSP:
• User ID — The account number or logon name for your ITSP account (Subscriber
Information section)
• Password — The password for your ITSP account (Subscriber Information section)
• Proxy — The proxy server for your ITSP account (Proxy and Registration section)
4. After making any necessary changes, click the Submit All Changes button.
5. To verify your progress, perform the following tasks:
• After the devices reboot, click Voice tab > Info. Scroll down to the Line 1 Status section
of the page. Verify that the line is registered. Refer to the following example.
Linksys ATA Administration Guide
section, enter the DNS server address(es) in the Primary DNS and
N N
, where is the line number that you want to configure.
Using the Administration Web Server
33