Digit Sequences - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Digit Sequence
[sequence]
.
(period)
<dialed:substituted>
,
(comma)
!
(exclamation point)
*xx
S0 or L0
Linksys ATA Administration Guide
Function
Enter characters within square brackets to create a list of
accepted key presses. The user can press any one of the keys
in the list.
• Numeric range
For example, you would enter
press any one digit from 2 through 9.
• Numeric range with other characters
For example, you would enter
press 3, 5, 6, 7, 8, or *.
Enter a period for element repetition. The dial plan accepts 0
or more entries of the digit. For example,
enter 0, 01, 011, 0111, and so on.
Use this format to indicate that certain dialed digits are
replaced by other characters when the sequence is
transmitted. The digits can be zero or more characters.
dialed
EXAMPLE 1:
<8:1650>xxxxxxx
When the user presses 8 followed by a seven-digit number,
the system automatically replaces the dialed 8 with 1650. If
the user dials 85550112, the system transmits
16505550112.
EXAMPLE 2:
<:1>xxxxxxxxxx
In this example, no digits are replaced. When the user enters
a 10-digit string of numbers, the number 1 is added at the
beginning of the sequence. If the user dials 9725550112,
the system transmits 19725550112
Enter a comma between digits to play an "outside line" dial
tone after a user-entered sequence.
EXAMPLE:
9, 1xxxxxxxxxx
An "outside line" dial tone is sounded after the user presses
9, and the tone continues until the user presses 1.
Enter an exclamation point to prohibit a dial sequence
pattern.
EXAMPLE:
1900xxxxxxx!
The system rejects any 11-digit sequence that begins with
1900.
Enter an asterisk to allow the user to enter a 2-digit star code.
Enter to reduce the short inter-digit timer to 0 seconds, or
S0
enter L0 to reduce the long inter-digit timer to 0 seconds.
Configuring Dial Plans
to allow the user to
[2-9]
to allow the user to
[35-8*]
allows users to
01.
50