Trunk Group Management - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

3. Enter the settings for each trunk group, as needed:
a. Click Voice tab > Tn, where n represents the trunk group number (T1 ... T4).
b. Enter the account information in the Subscriber Information section.
– Display Name: The Caller ID that you want to use for outbound calls on this line
– User ID: Your account number with the ITSP (usually the telephone number)
– Password: Your password for this ITSP account
c. In the Call Capacity field, enter the maximum number of concurrent calls allowed by
your ITSP, or leave the default setting, unlimited (16 calls).
d. In the Contact List field, modify the contact list as needed. See
Group, " on page 65.
e. Repeat this step for each trunk group that you need to configure.
4. Click Submit All Changes.

Trunk Group Management

You can check the status of the trunks by clicking the Trunk Status link, which appears both at
the top right corner of the web page and at the lower left corner.
You also can connect directly to the Trunk Status Page by entering the following URL:
spa8000-ip-addr . This page is available with the User Login orthe Admin Login.
/status
The Trunk Status page shows all calls that are currently active on each trunk group.
This page shows a snapshot of the trunk activity. You can refresh the data at any time by
clicking the Refresh button on the web browser toolbar. The page shows the following
information:
• External: The called number
• Station: The SPA8000 line that is in use for this call
Linksys ATA Administration Guide
SIP Trunking and Hunt Groups on the SPA8000
Trunk Status page
"Contact List for a Trunk
http://
68