Downloading Firmware" Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Basic Administration and Configuration of Your Linksys ATA
Downloading Firmware
Always download and install the latest firmware for your Linksys ATA device before doing any
configurations.
1. Direct your browser to the following URL:
Search
2. In the box near the top right corner of the page, type the model number of your
Linksys ATA device.
3. In the search results list, click the Downloads link for your product. Refer to the following
example.
Downloads
4. When the page appears choose your product version from the Version drop-
down list., if the page includes a
5. Under Firmware, click the link for the latest version of the firmware.
NOTE: If you are using Windows XP Service Pack 2 (SP2) and Internet Explorer, you may see
the "Pop-up blocked" message in your browser information bar. If you see this message, click
the information bar and select Temporarily Allow Pop-ups. Then click the link again.
6. Click Save in the File Download dialog box that appears.
7. In the Save As dialog box, choose a location for the file and then click Save.
8. When the download is complete, if prompted, click Close.
The name of the file depends on the firmware file of your device. If the firmware file you
download is in zip format, double-click the file and extract its contents to a single folder or to
the desktop. To extract the firmware file from the archive, use a utility such as WinZip, or use the
built-in decompression features of Windows XP.
Linksys ATA Administration Guide
http://www.linksys.com
Version
prompt.
Downloading Firmware
29