The Computer Cannot Connect Wirelessly To The Network; You Need To Modify Settings On The Device; You Cannot Use The Dsl Service To Connect Manually To The Internet; When You Open The Web Browser, The Login Screen Appears, Even Though You Do Not Need To Log In - Linksys X6200 User Manual

The computer cannot connect wirelessly to the
network.
Make sure the wireless network name or SSID is the same on both the computer and the
device. If you have enabled wireless security, then make sure the same security method
and key are used by both the computer and the device.

You need to modify settings on the device.

Open the web browser (for example, Internet Explorer or Firefox), and enter the device's IP
address in the address field (the default IP address is 192.168.1.1). When prompted,
complete the User name and Password fields (the default user name and password is
admin). Click the appropriate tab to change the settings.
You cannot use the DSL service to connect manually
to the Internet.
After you have installed the router, it will automatically connect to your Internet Service
Provider (ISP), so you no longer need to connect manually.
When you open the web browser, the login screen
appears, even though you do not need to log in.
These steps are specific to Internet Explorer but are similar for other browsers.
1. Open the web browser.
2. Go to Tools > Internet Options.
3. Click the Connections tab.
4. Select Never dial a connection.
5. Click OK.
The router does not have a coaxial port for the cable
connection.
A coaxial cable can connect to only a cable modem. Your modem router works as a modem
with your ADSL Internet, but if you have cable Internet, your modem router should be
connected to a separate cable modem. See page 9.
25