Dial Plans Section; Voip-To-Pstn Gateway Setup Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Voice tab > PSTN Line page >

Dial Plans section

Field Description
Dial Plan 1/2/3/4/5/6/7/ Dial plan script for this line.
8
The default is (xx.) Dial plans in the dial plan pool to be associated with a
VoIP Caller or a PSTN Caller. Each dial plan in the pool is referenced by a index
1 to 8 corresponding to Dial Plan 1 to 8. The dial plan syntax is the same as
that used for Line 1.
Voice tab > PSTN Line page >

VoIP-To-PSTN Gateway Setup section

Field Description
VoIP-To-PSTN Gateway Enable or disable VoIP-To-PSTN Gateway functionality.
Enable
The default is yes.
VoIP Caller Method to be used to authenticate a VoIP Caller to access the PSTN gateway.
Authentication Method Choose from {none, PIN, HTTP Digest.
The default is none.
VoIP PIN Max Retry Number of trials to allow VoIP caller to enter a PIN number (used only if
authentication method is set to PIN).
The default is 3.
One Stage Dialing Enable one-stage dialing (applicable if authentication method is none, or
HTTP Digest, or caller is in the Access List).
The default is yes.
Line 1 VoIP Caller DP Index of the dial plan in the dial plan pool to be used when the VoIP Caller is
calling from Line 1 of the same SPA3102 or AG310 unit during normal
operation (in other words, not due to fallback to PSTN service when Line 1
VoIP service is down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}
Authentication is skipped for Line 1 VoIP caller.
The default is 1.
Default VoIP Caller DP Index of the dial plan in the dial plan pool to be used when the VoIP Caller is
not authenticated. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}.
The default is 1.
Linksys ATA Administration Guide
PSTN Line page (AG310 and SPA3102)
149