System Information Section (Pap2T); Pstn Line Status Section (Ag310 And Spa3102) - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

User guide
Hide thumbs Also See for RTP300 - Broadband Router With 2 Phone Ports:
Table of Contents

Advertisement

Call 1 and 2 Jitter
Number of milliseconds for receiver jitter.
Call 1 and 2 Round Trip
Number of milliseconds for delay.
Delay
Call 1 and 2 Packets Lost Number of packets lost.
Call 1 and 2 Packet Error Number of invalid packets received.
Call 1 and 2 Mapped
The port mapped for Real Time Protocol traffic for Call 1/2.
RTP Port
Call 1 and 2 Media
Media loopback is used to quantitatively and qualitatively measure the voice
Loopback
quality experienced by the end user.
Voice tab > Info page >

System Information section (PAP2T)

Field
Description
DHCP
Indicates if DHCP is enabled.
Current IP
Displays the current IP address assigned to the ATA device.
Host Name
Displays the current IP address assigned to the ATA device.
Domain
Displays the network domain name of the ATA device.
Current Netmask
Displays the network mask assigned to the ATA device.
Current Gateway
Displays the default router assigned to the ATA device.
Primary DNS
Displays the primary DNS server assigned to the ATA device.
Secondary DNS
Displays the secondary DNS server assigned to the ATA device.
Voice tab > Info page >

PSTN Line Status section (AG310 and SPA3102)

Field
Description
(PSTN) Hook State
Hook state of the FXO port. Either On or Off.
(PSTN) Line Voltage
The voltage existing on the PSTN line.
(PSTN) Loop Current
The current (milliamperes) existing on the local loop.
Registration State
Indicates if the line has registered with the SIP proxy.
Last Registration At
Last date and time the line was registered.
Next Registration In
Number of seconds before the next registration renewal.
Last Called VoIP
The last VoIP number called from the FXO Line.
Number
Last Called PSTN
The PSTN number dialed by the SPA (logged only if a non-trivial dial plan is
Number
used).
Last VoIP Caller
The last VoIP caller to the FXO Line.
Last PSTN Caller
Name and number of the last PSTN caller.
Linksys ATA Administration Guide
Info page
97

Advertisement

Table of Contents
loading

Table of Contents