Pstn User Page (Ag310 And Spa3102); Pstn-To-Voip Selective Call Forward Settings Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

User guide
Hide thumbs Also See for RTP300 - Broadband Router With 2 Phone Ports:
Table of Contents

Advertisement

Field
Description
VMWI Ring Splash Len
Duration of ring splash when new messages arrive before the VMWI signal is
applied (0 – 10.0s).
The default is .5.
VMWI Ring Policy
The parameter controls when a ring splash is played when a the VM server
sends a SIP NOTIFY message to the ATA device indicating the status of the
subscriber's mail box. 3 settings are available:
The default is New VM Available.
Ring On No New VM
If enabled, the ATA device will play a ring splash when the VM server sends
SIP NOTIFY message to the ATA device indicating that there are no more
unread voice mails. Some equipment requires a short ring to precede the
FSK signal to turn off VMWI lamp.
The default is no.
Voice tab >

PSTN User page (AG310 and SPA3102)

On the SPA3102 and AG310, you can use the PSTN User page to configure the PSTN user
settings. This page includes the following sections:
"PSTN-To-VoIP Selective Call Forward Settings section" section on page 160
"PSTN-To-VoIP Speed Dial Settings section" section on page 161
"PSTN Ring Thru Line 1 Distinctive Ring Settings section" section on page 161
"PSTN Ring Thru Line 1 Ring Settings section" section on page 161
Voice tab > PSTN User page >

PSTN-To-VoIP Selective Call Forward Settings section

Field
Description
Cfwd Sel1-8 Caller
Eight PSTN Caller Number Patterns to be blocked for VoIP gateway services
or forwarded to a certain VoIP number. If the caller is blocked, the SPA will
not auto-answers the call.
Cfwd Sel1-8 Dest
Eight VoIP destinations to forward a PSTN caller matching the Cfwd Sel x
Caller parameter. If this entry is blank, the PSTN caller is blocked for VoIP
service.
Linksys ATA Administration Guide
New VM Available—ring as long as there is 1 or more unread voice mail
New VM Becomes Available—ring when the number of unread voice
mail changes from 0 to non-zero
New VM Arrives—ring when the number of unread voice mail
increases.
PSTN User page (AG310 and SPA3102)
160

Advertisement

Table of Contents
loading

Table of Contents