Linksys RT31P2 Quick Start Manual

http://support.freespeech.ie/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=59
Linksys RT31P2 - Broadband Router with 2 Phone Ports
A Router with three ethernet ports and two telephone sockets.
This device allows you to use two standard telephones for VOIP (Voice over IP) and connect other
computer peripherals to share your internet connection. With freespeech you can configure the two
telephone lines on same account (same phone number), so if one phone is busy the other phone
will ring also you can make calls on one line while the other is busy - nice. You may also configure
line 1 and line 2 for separate service providers.
An example setup for this device
3 Computers and 2 phones sharing the same internet connection. The phones used are standard
analogue telephones (same as you would use with eircom), all the calls are routed via VOIP (Voice
Over IP).
Please refer to user manual for full details connecting your phones and
configuring the router.
Logging on
default url to log onto the router is
default username:admin, default password:admin
Configure the STUN server
You will normally only need to use a STUN server if you are configuring this behind another router.
TIPS: if you are using wireless broadband or cable STUN is normally OFF, if you are using DSL and
you do not have your dsl modem in bridged mode STUN is ON (if you had to configure PPPoE
settings on the RT31P2 then your DSL modem is in bridged mode). If you are still unsure turn STUN
ON.
Select menu: Voice > System and enter stun.freespeech.ie
Configure Lines
Select menu: Voice > Line1
Author:
www.freespeech.ie
Created On: 08 Mar 2006 08:56 PM
http://192.168.15.1/Voice_Setup.htm
Page 1/2
Irelands free VOIP provider - Powered By SIP