Distinctive Ring Settings Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Field Description
Accept Media Loopback Controls how to handle incoming requests for loopback operation. Choices
Request are: Never, Automatic, and Manual, where:
•
•
•
The default is Automatic.
Media Loopback Mode The loopback mode to assume locally when making call to request media
loopback. Choices are: Source and Mirror. Default is Source.
Note that if the Linksys ATA device answers the call, the mode is determined
by the caller.
Media Loopback Type The loopback type to use when making call to request media loopback
operation. Choices are Media and Packet. Default is Media.
Note that if the Linksys ATA device answers the call, then the loopback type is
determined by the caller (the Linksys ATA device always picks the first
loopback type in the offer if it contains multiple types.)
Voice tab > User page >

Distinctive Ring Settings section

Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest
match) will be used for alerting the subscriber.
Field Description
Ring1 - 9 Caller Caller number pattern to play Distinctive Ring/CWT 1, 2, 3, 4, 5, 6, 7, 8, or 9.
The default is blank.
Voice tab > User page >
Ring Settings section
Field Description
Default Ring Default ringing pattern, 1 – 8, for all callers.
The default is 1.
Default CWT Default CWT pattern, 1 – 8, for all callers.
The default is 2.
Hold Reminder Ring Ring pattern for reminder of a holding call when the phone is on-hook.
The default is None.
Call Back Ring Ring pattern for call back notification.
The default is None.
Cfwd Ring Splash Len Duration of ring splash when a call is forwarded
(0 – 10.0s).
The default is 0.
Cblk Ring Splash Len Duration of ring splash when a call is blocked (0 – 10.0s).
The default is 0.
Linksys ATA Administration Guide
never—never accepts loopback calls; reply 486 to the caller
automatic—automatically accepts the call without ringing
manual —rings the phone first, and the call must be picked up manually
before loopback starts.
User page
159