Pstn Line Page (Ag310 And Spa3102) - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

User guide
Hide thumbs Also See for RTP300 - Broadband Router With 2 Phone Ports:
Table of Contents

Advertisement

Field
Description
Proxy Redundancy
PAP2T will make an internal list of proxies returned in DNS SRV records. In
Method
normal mode, this list will contain proxies ranked by weight and priority.
if Based on SRV port is configured the PAP2T does normal first, and also
inspect the port number based on 1st proxy's port on the list.
The default is Normal.
Voice Mail Server
Enter the URL or IP address of the server.
Mailbox Subscribe
Expiry time to the voice mail server. The time to send another subscribe
Expires
message to the voice mail server.
Voice tab >

PSTN Line page (AG310 and SPA3102)

On the SPA3102 and AG310, you can use the PSTN Line page to configure your PSTN line. This
page includes the following sections:
"Line Enable section" section on page 124
"NAT Settings section" section on page 142
"Network Settings section" section on page 142
"SIP Settings section" section on page 143
"Proxy and Registration section" section on page 145
"Subscriber Information section" section on page 146
"Audio Configuration section" section on page 146
"Dial Plans section" section on page 149
"VoIP-To-PSTN Gateway Setup section" section on page 149
"VoIP Users and Passwords (HTTP Authentication) section" section on page 150
"FXO (PSTN) Timer Values (sec) section" section on page 151
"PSTN Disconnect Detection section" section on page 153
"International Control (Settings) section" section on page 155
Linksys ATA Administration Guide
PSTN Line page (AG310 and SPA3102)
141

Advertisement

Table of Contents
loading

Table of Contents