Line Status Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Voice tab > Info page >
Product Information section
Field Description
Product Name Model number/name.
Serial Number Serial number.
Software Version Software version number.
Hardware Version Hardware version number.
MAC Address MAC address.
Client Certificate Status of the client certificate, which can indicate if the ATA device has been
authorized by your ITSP.
Customization For a Remote Configuration (RC) unit, this field indicates whether the unit
has been customized or not. Pending indicates a new RC unit that is ready for
provisioning. If the unit has already retrieved its customized profile, this field
displays the name of the company that provisioned the unit.
Voice tab > Info page >
System Status section
Field Description
Current Time Current date and time of the system; for example, 10/3/2003 16:43:00.
Elapsed Time Total time elapsed since the last reboot of the system; for example, 25 days
and 18:12:36.
RTP Packets Sent Total number of RTP packets sent (including redundant packets).
RTP Bytes Sent Total number of RTP bytes sent.
RTP Packets Recv Total number of RTP packets received (including redundant packets).
RTP Bytes Recv Total number of RTP bytes received.
SIP Messages Sent Total number of SIP messages sent (including retransmissions).
SIP Bytes Sent Total number of bytes of SIP messages sent (including retransmissions).
SIP Messages Recv Total number of SIP messages received (including retransmissions).
SIP Bytes Recv Total number of bytes of SIP messages received (including retransmissions).
External IP External IP address used for NAT mapping.
Voice tab > Info page >

Line Status section

Field Description
(PSTN) Hook State Hook state of the FXO port. Options are either On or Off.
Registration State Indicates if the line has registered with the SIP proxy.
Last Registration At Last date and time the line was registered.
Next Registration In Number of seconds before the next registration renewal.
Linksys ATA Administration Guide
Info page
95