Distinctive Ring Patterns Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

VoIP PIN Tone Specification of the tone played to prompt a VoIP caller for a PIN number (if
PIN authentication is selected and the caller requires authentication to use
the PSTN gateway). This setting applies to the SPA3102 only.
The default is 600@-10;*(0/1/1,.1/.1/1,.1/.1/1,.1/.5/1).
PSTN PIN Tone Specification of the tone played to prompt a PSTN caller for a PIN number (if
PIN authentication is selected and the caller requires authentication to use
the VoIP gateway). This setting applies to the SPA3102 only.
The default is 600@-10;*(0/.7/1,.2/.1/1,.2/.1/1,.2/.5/1).
Feature Invocation Tone Played when a feature is implemented.
The default is 350@-16;*(.1/.1/1).
This field is not found in the PAP2T.
Voice tab > Regional page >

Distinctive Ring Patterns section

Field Description
Ring1 Cadence Cadence script for distinctive ring 1.
The default is 60(2/4).
Ring2 Cadence Cadence script for distinctive ring 2.
The default is 60(.3/.2, 1/.2,.3/4).
Ring3 Cadence Cadence script for distinctive ring 3.
The default is 60(.8/.4,.8/4).
Ring4 Cadence Cadence script for distinctive ring 4.
The default is 60(.4/.2,.3/.2,.8/4).
Ring5 Cadence Cadence script for distinctive ring 5.
The default is 60(.2/.2,.2/.2,.2/.2,1/4).
Ring6 Cadence Cadence script for distinctive ring 6.
The default is 60(.2/.4,.2/.4,.2/4).
Ring7 Cadence Cadence script for distinctive ring 7.
The default is 60(.4/.2,.4/.2,.4/4).
Ring8 Cadence Cadence script for distinctive ring 8.
The default is 60(0.25/9.75).
Ring9 Cadence Cadence script for distinctive ring 9. This field is for the SPA2102 and
SPA8000 only.
The default is 60(.4/.2,.4/2).
Linksys ATA Administration Guide
Regional page
112