Setting Up Your Linksys Ata Device" Section; Using The Administration Web Server" Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Basic Administration and Configuration of Your Linksys ATA
Setting up Your Linksys ATA Device
After installation and basic configuration of your Linksys ATA device, you will use the
administration web server to finish your configuration.
Linksys ATA devices support two levels of administration privileges: Administrator and User.
Both privileges can be password protected.
NOTE: By default, there are no passwords assigned for either the Administrator account or the
User account.
The Administrator account can modify all the web profile parameters and the passwords of
both Administrator and User account. The User account can access only part of the web profile
parameters. The parameters that the User account can access are specified using the
Administrator account on the Provisioning page of the administration web server.
To directly access the Administrator account level privilege, use the following URL:
http://<ipaddress>/admin/voice
If the password has been set for the Administrator account, the browser prompts for
authentication. The User account name and the Administrator account name cannot be
changed.
When browsing pages with the Administrator account privilege, you can switch to User
account privilege by clicking the User Login link.
If the User account password is set, the browser prompts for authentication when you click the
User Login link. From the User account, you can switch to the Administrator account by
clicking the Admin Login link. Authentication is required if the Administrator account
password has been set.
NOTE: Switching between User and Administrator accounts or between basic and advanced
views discards any uncommitted changes on the web pages.
Using the Administration Web Server
This section describes how to use the administration web server to configure the advanced
settings of the Linksys ATA device. It includes the following topics:
"Connecting to the Administration Web Server" section on page 32
•
"Setting Up the WAN Configuration for Your Linksys ATA Device" section on page 32
•
"Registering to the Service Provider" section on page 33
•
"Advanced Configurations" section on page 34
•
Linksys ATA Administration Guide
Setting up Your Linksys ATA Device
31