Chapter 4: Configuring Voice Services; Supported Codecs - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

4
Configuring Voice Services
This chapter describes how to configure your ATA device to meet the customer's requirements
for voice services.
"Supported Codecs," on page 44
•
"Using a FAX Machine (SPA2102, SPA3102 or SPA8000)," on page 45
•
"Managing Caller ID Service," on page 47
•
"Silence Suppression and Comfort Noise Generation," on page 48
•
"Configuring Dial Plans," on page 49
•
"Secure Call Implementation," on page 57
•
"SIP Trunking and Hunt Groups on the SPA8000," on page 61
•

Supported Codecs

The following list shows the current supported codecs for each Linksys ATA device. If you need
to change the G711u codec which is configured by default, set your preferred codecs in the FXS
Line tab(s); Audio Configuration. You may set your first, second, and third preferred codec. See
"Linksys ATA Routing Field Reference," on page 86
PAP2T / SPA2102 / SPA3102 / SPA8000 / AG310
• G.711u (configured by default)
• G.711a
• G.726-16
• G.726-24
• G.726-32
• G.726-40
• G.729a
• G.723
WRTP54G/RTP300 / WAG54GP2
• G.711u (configured by default)
• G.711a
• G.726-32
Linksys ATA Administration Guide
Configuring Voice Services
.
Supported Codecs
44