15 | Automatic cleaning - iCareSystem
>
Cancellation will proceed.
>
Once cancellation has finished, you will be prompted to check the cooking cabinet for Active Green cleaner tab
residue.
7. Open the cooking cabinet door.
8. Close the cooking cabinet door.
>>
After that, the cooking system is ready for use again. The home screen will appear.
TIP
If a power failure occurs during automatic cleaning, automatic cleaning will be interrupted. Once power has
been established again, automatic cleaning will resume.
15.7
Forced cleaning after operating hours
If you have activated forced cleaning, you will be prompted to clean the cooking system after a defined time. You
can only continue working with the cooking system once cleaning is complete.
1. Press this button:
2. Press this button:
3. Press this button:
4. To activate forced cleaning, press this button: ON
5. To set the time after which you want to be prompted to clean the cooking system, press this button: Time to
cleaning request Please note that this time represents how long the cooking system has been in operation, not
how much total time has passed.
6. Set the time anywhere between 1– 24 hours.
7. To set the number of hours by which cleaning can be postponed following a prompt, press this button: Forced
cleaning delay time
8. Set the time anywhere between 1 – 24 hours.
>>
The footer will indicate how many hours of operation are left until cleaning will be required.
15.8
Cleaning schedule
Use a cleaning schedule to specify the weekdays on which you want Forced cleaning [} 98] to occur.
1. Press this button:
2. Press this button:
3. Press this button:
4. In order to define how the cooking system behaves when a cleaning request is issued, press this button:
Scheduled cleaning time
5. If you do not want to be notified when the scheduled cleaning time arrives, press this button: OFF
6. If you want a warning to be displayed at the scheduled cleaning time, press this button: Warning
7. To specify that cleaning must be done immediately when a cleaning request is displayed, press this
button: Forced cleaning
8. Tap in the icon bar to return to the cleaning schedule overview screen.
9. Select the day of the week on which you want cleaning to occur.
10. Press this button: ON
11. Set the time at which you want cleaning to occur.
12. Tap in the icon bar to return to the cleaning schedule overview screen.
98 / 120
Cleaning
Forced cleaning
Cleaning
Cleaning schedule
Original instructions for use
Need help?
Do you have a question about the iCombi Pro and is the answer not in the manual?