Placing Tickets - Rational iCombi Pro Original Instructions For Use

1. To place a timer at the current time, first tap the timer on the ticket board, and then select a rack level.
>
The timer will be placed at the current time.
2. To place a timer in the future, drag the timer to the start time and rack level of your choice.
3. To move the timer to a different rack level or change its start time, press and hold the timer.
4. Drag the timer to the correct position.
5. To increase or decrease timer length, tap the timer briefly,
6. and then either rotate the selection dial or press these buttons:
>
After a brief waiting period, your new settings will be applied.
>>
When the timer goes off, you will be prompted to unload the cooking system. This symbol will appear beside
the rack level:
10.4

Placing tickets

a
You have created manual tickets [} 52], shopping carts [} 53] or a ticket board [} 54].
1. Drag a ticket to the desired rack level.
>
For better orientation, the rack level you are placing the ticket on will be highlighted in blue. The time will also
be displayed on the ticket as an additional aid.
>
If the rack level is marked in yellow or red, it means that you cannot place the ticket without moving tickets
that have already been placed. More information is available here: Combination check [} 56] and placement
logic [} 56]
2. If you have placed multiple tickets, scale the time axis back to a summary view. To do so, press this button:
The following options are available to optimize the positioning of the tickets:
Close planning gaps [} 56]
n
Time optimization [} 57]
n
Energy optimization [} 58]
n
Target time cooking [} 59]
n
If you place tickets for the actual time, a vertical yellow or blue bar will appear:
A yellow bar indicates that the cooking cabinet is heating up.
n
A blue bar indicates that the cooking cabinet is being cooled down with the Cool Down function.
n
The width of the bar indicates how long the heating or cooling will take.
n
Once the desired temperature is reached, you will be prompted to load the food. This symbol will appear beside
the rack level:
Original instructions for use
. The cooking time is at 00:00.
.
10 | iProductionManager
Or
55 / 120