Combination Check; Positioning Logic; Close Planning Gaps - Rational iCombi Pro Original Instructions For Use

10 | iProductionManager
Once you have loaded the cooking system, it will display the remaining time for the food to remain in the cooking
cabinet next to the corresponding rack level.
When the cooking process on the ticket finishes, you will be prompted to unload the cooking system. This symbol
will appear beside the rack level:
10.4.1

Combination check

For each ticket you want to place in the iProductionManager, a check is carried out to determine whether the new
ticket matches the already positioned tickets and can be placed at the selected time. The tickets are separated
based on the following 3 values and checked independently of each other:
Each ticket is assigned an operating mode. A check will be carried out to determine whether the operating
n
modes match.
A cooking cabinet temperature is assigned to each ticket. A check will be carried out to determine whether the
n
cooking cabinet temperatures match.
A cooking cabinet humidity is assigned to each operating mode. A check is carried out to determine whether
n
the cooking cabinet humidities match.
Both manual operating modes and intelligent cooking paths are checked for compatibility. You can only combine
cooking paths that are cooked in a consistent climate. Cooking paths that run through different climates, such as
low-temperature roasting, can not be combined with other tickets. Furthermore, only single-step manual
programs can be combined.
10.4.2

Positioning logic

Based on the combination check, the iCombi Pro decides where the ticket is placed. The tickets are positioned
optimally in the iProductionManager depending on the result of the check. A color marking in the rack levels
indicates whether a new ticket will impact the already positioned tickets in the iProductionManager:
If the rack levels are marked in yellow, you can place a ticket, but tickets that are already placed are moved.
n
If the background is red, you can not place the ticket because a ticket is already being processed.
n
If you move a ticket, the entire block in which the ticket was placed after the combination check is moved.
10.4.3

Close planning gaps

You can have time gaps that were created when placing tickets across all rack levels closed automatically by your
unit.
56 / 120
. The cooking time is at 00:00.
Original instructions for use