Cooking System; Information On The Unit Type; Power Usage; Iproductionmanager Energy-Saving Mode - Rational iCombi Pro Original Instructions For Use

2. Press the sound you would like to use.
>
The sound will be played.
3. To turn off sounds, press this button: OFF
4. Tap in the icon bar to return to the overview screen.
5. If you want the sound to play continuously until the cooking system has been loaded or the action has been
confirmed, press this button:
6. If you only want the sound to play for a certain length of time, press this button:
>
The Tone length section will be activated.
7. Set the length anywhere between 0 - 180 seconds.
8. To apply the setting, press this button in the icon bar:
>>
You will be returned to the overview screen.
13.5

Cooking system

1. Press this button:
2. Press this button:
13.5.1

Information on the unit type

Here, you can see the model of your unit and the software version installed.
13.5.2

Power usage

You can call up the Energy Dashboard via this menu item. From there, you can monitor your cooking system's
energy consumption. Energy consumption is calculated in detail based on the chosen settings; it can also be
displayed and evaluated in ConnectedCooking.
Press this button:
The energy consumption display allows you to view the energy consumption of the most recently completed
cooking process. The following consumption data is provided after completion of a manual or intelligent cooking
process, use of iProductionManager, or cleaning:
Cooking process duration
n
Type of cooking process
n
Energy consumption in kWh
n
Energy consumption information is only available after the cooking process has been completed; it is
overwritten when a new cooking process is started. The energy values shown are calculated rather than
measured. Measuring instruments may indicate slightly different values to the ones displayed.
13.5.3

iProductionManager energy-saving mode

Press this button:
13.5.4

Screen lock

Here, you can switch the screen lock on and off.
To activate the function, press this button:
n
To deactivate the function, press this button:
n
Original instructions for use
Continuous playback ON
Cooking system
to check the energy consumption of your cooking system.
to switch the IPM energy saving mode on or off.
NOTE
ON
OFF
13 | Settings
Continuous playback OFF
75 / 120