Banqueting Plate Weight; Number Of Racks; Order Of Racks; Load Calculation For Manual Programs In Iproductionmanager - Rational iCombi Pro Original Instructions For Use

13 | Settings
13.6.4

Banqueting plate weight

Before starting the Finishing step, set how heavy an empty plate is. Based on this information, your iCombi Pro
will adjust the cooking steps so that they achieve an ideal Finishing result and so that no moisture forms on the
plates. More information is available here: Setting the banqueting plate weight [} 50]
13.6.5

Number of racks

Here, you can set how many racks you want to use in the iProductionManager.
1. Press this button:
2. Select the desired value between 0 - 10.
>>
The setting is adopted immediately.
13.6.6

Order of racks

Here, you can set whether the rack order should be shown in ascending or descending order in the
iProductionManager.
1. To display the racks in ascending order, press:
2. To display the racks in descending order, press:
>>
The setting is adopted immediately.
13.6.7

Load calculation for manual programs in iProductionManager

Use this setting to specify whether cooking time should be extended on manual programs in iProductionManager
when the door is left open during cooking and the measured energy loss is significant enough that the desired
cooking results cannot be achieved using the current settings.
1. To activate the function, press this button: Load calculation for manual programs in iProductionManager ON
13.6.8

Hold time climate

This setting allows you to specify how long you want the cooking system to maintain the climate within the
cooking cabinet when you are not preparing dishes using iProductionManager.
1. Press this button:
2. Select the desired value on the scale.
>>
The hold time will be adjusted immediately.
A shorter holding time will save energy.
78 / 120
Number of racks
Climate hold time
123
321
NOTE
Original instructions for use