Lacp Port-Priority - Fujitsu XG1200 User Manual

XG1200 User's Guide

5.7.4 lacp port-priority

Function
Sets the priority of ports in LACP.
This LACP port priority is used as information to identify ports in LACP, but usually it is not necessary to be changed.
Use the no form to return to the default setup.
Prompt
xg(config)#
Command syntax
lacp port-priority port <1-12> priority <1-65535>
no lacp port-priority port <1-12>
Parameter
port <1-12>
Specifies the port number to set the port priority of LACP in the range of 1 to 12.
priority <1-65535>
Specifies the port priority of LACP in the range of 1 to 65535.
Command type
Configuration command
Default
32768
Example
Set LACP port priority to 10000 for Port 2.
xg(config)# lacp port-priority port 2 priority 10000
104/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005