Spanning-Tree Portfast Bpdu-Filter - Fujitsu XG1200 User Manual

XG1200 User's Guide

5.9.14 spanning-tree portfast bpdu-filter

Function
Enable the BPDU filter for the port in which the portfast function is valid.
The port having the enabled BPDU filtering does not send or receive a BPDU.
Use the no form to return to the default setup.
Prompt
xg(config-if)#, or xg(config-agg)#
Command syntax
spanning-tree portfast bpdu-filter
no spanning-tree portfast bpdu-filter
Parameter
portfast bpdu-filter
Enables BPDU filter.
Command type
Configuration command
Default
None
Note
This function is valid for the port in which the "spanning-tree portfast" command is set.
Example
Enable the BPDU filter for port 2:
xg(config)# interface port 2
xg(config-if)# spanning-tree portfast
xg(config-if)# spanning-tree portfast bpdu-filter
133/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005