Displaying Using Monitor Command - Fujitsu XG1200 User Manual

XG1200 User's Guide

2.2.12 Displaying Using Monitor Command

For screens that are displayed using the monitor screen, you can perform operations, such as update and move, via specific
keys.
The following table shows the keys used to perform screen-related operations.
Displayed item
ESC:exit
F:refresh
U:page up
D:page down
L:page left
R:page right
Press the [Esc] key to close the monitor screen.
Press the [F] or [f] key to refresh the screen.
Press the [U] or [u] key to scroll up to the previous page.
If the current page contains all lines, this item will not appear.
Press the [U] or [u] key to scroll up to the next page.
If the current page contains all lines, this item does not appear.
Press the [L] or [l] key to scroll the screen to the left.
If the current page contains all columns, this item will not appear.
Press the [R] or [r] key to scroll the screen to the right.
If the current page contains all columns, this item will not appear.
20/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Meaning