Table of Contents
Advertisement
XG1200 User's Guide
5.16.2 rmon collection history
Function
Sets a RMON history. Up to 24 entries can be set.
Use the no form to delete the information you have set.
Prompt
xg(config)#
Command syntax
rmon collection history INDEX { port <1-12> | agg-port <1-6> }
[buckets BUCKET-NUM] [interval SECOND] [owner OWNERNAME]
no rmon collection history INDEX
Parameter
INDEX
Specifies an entry index of the history within the range of 1 to 65535.
port <1-12>
Specifies a port number to collect the RMON history group.
agg-port <1-6>
Specifies an aggregation group number to collect the RMON history group.
buckets BUCKET-NUM
Specifies the data storage count of the RMON history entry group within the range of 1 to 20.
If omitted, the default storage count is 10 data sets.
interval SECOND
Specifies a time interval to collect the RMON history group data within the range of 1 to 3600 seconds.
If omitted, the default interval is 1800 seconds (or 30 minutes).
owner OWNERNAME
Specifies an owner name of the entry using up to 127 characters.
If omitted, no owner name is set.
Command type
Configuration command
Default
None
Message
% RMON collection history can register up to 24
Explanation
No more setup is allowed as the RMON history group data has reached the registration limit.
Solution
Delete unnecessary RMON history groups, and reissue the command.
% RMON collection history %1$ is not set.
Explanation
You have attempted to delete a non-existing RMON history group.
[[Inserted string]]%1$: Index number
Solution
Review the specified index, and reissue the command.
% OWNERNAME is too long.
Explanation
The owner name has exceeded the limit length.
Solution
Review the owner name length and reissue the command.
% Agg-port %1$ does not exist
Explanation
The specified aggregation group has not been created.
[[Inserted string]]%1$: Specified aggregation group number
Solution
Review the "agg-port" settings and reissue the command.
% OWNERNAME cannot be used.
Explanation
Unusable character has been specified for the "owner".
Solution
Review the specified "owner", and reissue the command.
Example
Set the data collection interval to 30 minutes (default value) and the data storage count to 20 data sets for the RMON history of
port 1. The 10-hour history statistics will be logged.
xg(config)# rmon collection history 1 port 1 buckets 20
189/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Advertisement
Table of Contents
