Fujitsu XG1200 User Manual page 100

XG1200 User's Guide
Link aggregation common information
Link aggregation information related to the switch in general will be displayed. The display content is the same as the case of a
static link aggregation.
LACP Link aggregation specific information
A state common to each aggregation group will be displayed.
System Key
The system key information used in LACP is displayed.
Partner
Information on LACP of the connection destination device is displayed.
−
−
−
This is used to display the state of each port comprising an LACP link aggregation.
[port 1]
Displays the state of each port comprising an LACP link aggregation.
Port Priority
The status of the port is displayed.
−
−
Synchro State
The synchronization status of the port is displayed.
−
−
Receive State
Displays the reception status of LACP protocol.
−
−
−
−
−
−
−
Periodic Tx State
The state of transmit interval of LACP control frame is displayed.
−
−
−
Partner Port Priority
Port priority value of the connection destination device is displayed.
Partner Port Number
The port number of the connection destination device is displayed.
Partner Synchro State
The port synchronization status of the connection destination device is displayed.
−
−
Example
Display the state of all aggregation groups.
xg> show link-aggregation
System Priority
LACP system priority of the connection destination device is displayed.
System ID
LACP system identification information of the connection destination device is displayed.
Key
LACP system key of the connection destination device is displayed.
Active
The port is usable.
Inactive
The port is not usable.
Sync
The link state of LACP with the connection destination device is in a synchronized state.
No Sync
The link state of LACP with the connection destination device is not in a synchronized state.
Invalid
The LACP port of the connection destination device is in trouble.
Initialize
The LACP port of the connection destination device is in initialization.
Port Disabled
The LACP port of the connection destination device is disabled.
LACP Disabled
The LACP of the connection destination device is disabled.
Expired
The LACP information with the connection destination device is expired.
Defaulted
The LACP port of the connection destination device is about to be connected.
Current
The LACP port of the connection destination device is in LACP connection state.
No Periodic
A state in which LACP control frame is not sent.
Fast Periodic
A state in which LACP control frame is sent in a short interval.
Slow Periodic
A state in which LACP control frame is sent in a long interval.
Sync
The link state of LACP with the XG1200 is in a synchronized state.
No Sync
The link state of LACP with the XG1200 is not in a synchronized state.
All Rights Reserved, Copyright (C) PFU LIMITED 2005
100/258