Link-Pass-Through - Fujitsu XG1200 User Manual

XG1200 User's Guide

5.8.11 link-pass-through

Function
Link Pass Through is a function that monitors the link state of a specific port, and, by synchronizing the link state of the
specified port, promptly notifies changes of the link state to devices connected to the port to notify.
This command specifies the link state monitoring port and the port to notify link state.
Use the no form to return to the default setup.
Prompt
xg(config)#
Command syntax
link-pass-through { monitored-port <1-12> | monitored-agg-port <1-6>}
[domino-port <1-12> [<1-12>
no link-pass-through { monitored-port <1-12> | monitored-agg-port <1-6>}
Parameter
monitored-port <1-12>
Specifies a port to monitor the link state.
monitored-agg-port <1-6>
Specifies an aggregation group to monitor the link state.
domino-port <1-12> [<1-12>
Specifies the port number to notify the link state.
When specifying multiple port numbers, list them separated with " " (space).
domino-agg-port <1-6> [<1-6>
Specifies the aggregation group number to notify the link state.
When specifying multiple aggregation group numbers, list them separated with " " (space).
Command type
Configuration command
Default
None
Message
% Agg-port %1$ does not exist.
Explanation
The specified aggregation group is not created.
[[Inserted string]]%1$: specified aggregation group number
Solution
Review the specification of aggregation group numbers.
% monitored-port and domino-port cannot specify a port belonging to an aggregation port. port=%d¥n
Explanation
The ports comprising a link aggregation cannot be specified to monitored-port and domino-port.
[[Inserted string]]%1$: port number specified to monitored-port or domino-port
Solution
Review the ports specified to monitored-port or domino-port.
% Cannot set same port number in monitored-port and domino-port. port %1$
Explanation
The same port number cannot be set to monitored-port and domino-port.
[[Inserted string]]%1$: port number
Solution
Review the parameter specified to monitored-port or domino-port.
% Cannot set same aggregation port number in monitored-agg-port and domino-agg-port. agg-port %1$
Explanation
The same aggregation group number cannot be set to monitored-port and domino-agg-port.
[[Inserted string]]%1$: aggregation group number
Solution
Review the parameters specified to monitored-port or domino-agg-port.
% Cannot set same port number in domino-port. port %1$
Explanation
The same port number cannot be set to domino-port.
[[Inserted string]]%1$: port number
Solution
Review the parameter specified to domino-port.
% Cannot set same aggregation port number in domino-agg-port. agg-port %1$
The same aggregation group number cannot be set to domino-agg-port.
[[Inserted string]]%1$: aggregation group number
Solution
Review the parameter specified to domino-agg-port.
Example
Monitor the link state of aggregation group 1 and set ports 4 and 5 to recive link state notification.
xg(config)# link-pass-through monitored-agg-port 1 domino-port 4 5
]] [domino-agg-port <1-6> [<1-6>
]
]
114/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
]]