Ntp (Ntp Control: 8600-8699) - Fujitsu XG1200 User Manual

XG1200 User's Guide
Message
IDSeverity
S8502
INFO
P8510
WARNING
A.2.12

ntp (NTP Control: 8600-8699)

Message
IDSeverity
P8601
WARNING
P8602
INFO
P8603
WARNING
S8691
ERROR
RMON alarm by falling-threshold.
index:%1$ OID:%2$ sample:%3$ value:%4$ falling-threshold:%5$
Explanation
The current sampled value was less than the lower threshold defined by the "RMON alarm" command, and a
trap for the corresponding RMON event was generated.
[[Inserted string]]%1$: RMON alarm index
[[Inserted string]]%2$: OID of MIB object to be monitored
[[Inserted string]]%3$: Method of determining threshold
1: An absolute value is used when determining threshold (absolute)
2: A difference between the previous and current values is used when determining threshold (delta)
[[Inserted string]]%4$: Value of MIB object to be monitored
[[Inserted string]]%5$: Lower threshold of MIB object to be monitored
Cannot find host %1$.
Explanation
Failed to find an IP address from the host name specified with the "snmp-server trap" command.
[[Inserted string]]%1$: Host name specified with the "snmp-server trap" command
Solution
Review the host name defined. Check that the DNS has been configured for the XG1200.
No server suitable for synchronization found.
Explanation
Your NTP server is not synchronized.
Solution
Check the NTP server' host name defined by the "ntp-server" command as well as the NTP server operating
status.
Time server %1$ offset %2$ sec.
Explanation
Time synchronization using a NTP server was performed to correct the time.
[[Inserted string]]%1$: Host name or IP address of the NTP server that corrected the time
[[Inserted string]]%2$: Corrected time difference in seconds
Cannot find host %1$.
Explanation
Failed to find an IP address from the host name specified with the "ntp-server host" command.
[[Inserted string]]%1$: Host name specified with the "ntp-server host" command
Solution
Review the host name defined.
Check that the DNS has been configured for the XG1200.
System Error: %1$
Explanation
An system error has occurred while NTP time synchronization was in progress.
[[Inserted string]]%1$: Additional information on the error
Solution
Note the message contents and contact your XG1200 sales representative.
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Message/Explanation/Solution
Message/Explanation/Solution
242/258